Hollow Ru/RuO2 nanospheres with nanoparticulate shells for high performance electrocatalytic oxygen evolution reactions.

This work shows that hollow Ru/RuO2 nanoparticles having nanoparticulate shells (HN-Ru/RuO2) can be prepared using hollow microporous organic polymers with Ru species (H-MOP-Ru) as precursors. Using silica spheres as templates, H-MOPs were prepared through the Sonogashira-Hagihara coupling of 1,3,5-triethynylbenzene with 2,3-ethoxymethylenedioxy-1,4-diiodobenzene. Acid hydrolysis of cyclic ethyl orthoformate protecting groups generated catechol moieties to form H-MOP-Cat. Then, H-MOP-Ru was obtained by incorporating Ru species into H-MOP-Cat. Heat-treatment of H-MOP-Ru under air induced the formation of HN-Ru/RuO2 with a diameter of 61 nm and shells consisting of 6-7 nm nanoparticles. Due to the hollow structure and nanoparticulate shells, HN-Ru/RuO2 showed a high surface area of 80 m2 g-1 and a pore volume of 0.18 cm3 g-1. The HN-Ru/RuO2 showed enhanced electrocatalytic performance for the oxygen evolution reaction (OER) with an overpotential of 295 mV @ 10 mA cm-2 and a Tafel slope of 46 mV dec-1 in alkaline electrolyte, compared with control RuO2 such as commercial Ru/RuO2 nanoparticles (A-Ru/RuO2) and home-made Ru/RuO2 nanoparticles (N-Ru/RuO2) prepared via the same synthetic procedure as HN-Ru/RuO2. While HN-Ru/RuO2 inevitably contained Pd originated from coupling catalysts, it showed superior performance to Ru/RuO2 nanoparticles with the same Pd content (N1-Ru/RuO2), indicating that the efficient electrocatalytic performance of HN-Ru/RuO2 is attributable to its hollow structure and nanoparticulate shells.

Biomass- and Carbon Dioxide-Derived Polyurethane Networks for Thermal Interface Material Applications.

Recent environmental concerns have increased demand for renewable polymers and sustainable green resource usage, such as biomass-derived components and carbon dioxide (CO2). Herein, we present crosslinked polyurethanes (CPUs) fabricated from CO2- and biomass-derived monomers via a facile solvent-free ball milling process. Furan-containing bis(cyclic carbonate)s were synthesized through CO2 fixation and further transformed to tetraols, denoted FCTs, by aminolysis and utilized in CPU synthesis. Highly dispersed polyurethane-based hybrid composites (CPU-Ag) were also manufactured using a similar ball milling process. Due to the malleability of the CPU matrix, enabled by transcarbamoylation (dynamic covalent chemistry), CPU-based composites are expected to present very low interfacial thermal resistance between the heat sink and heat source. The characteristics of the dynamic covalent bond (i.e., urethane exchange reaction) were confirmed by the results of dynamic mechanical thermal analysis and stress relaxation analysis. Importantly, the high thermal conductivity of the CPU-based hybrid material was confirmed using laser flash analysis (up to 51.1 W/m·K). Our mechanochemical approach enables the facile preparation of sustainable polymers and hybrid composites for functional application.

Amidoxime-Containing Zr and Hf Atomic Layer Deposition Precursors for Metal Oxide Thin Films.

In this article, we discuss the synthesis of eight novel zirconium and hafnium complexes containing amidoxime ligands as potential precursors for atomic layer deposition (ALD). Two amidoximes, viz., (E)-N'-hydroxy-N,N-dimethylacetimidamide (mdaoH) and (Z)-N'-hydroxy-N,N-dimethylpivalimidamide (tdaoH), along with their Zr and Hf homoleptic complexes, Zr(mdao)4 (1), Hf(mdao)4 (2), Zr(tdao)4 (3), and Hf(tdao)4 (4) were prepared. We further synthesized heteroleptic compounds with different physical properties by introducing cyclopentadienyl (Cp) ligand, namely, CpZr(mdao)3 (5), CpHf(mdao)3 (6), CpZr(tdao)3 (7), and CpHf(tdao)3 (8). Thermogravimetric analysis was used for the assessment of the evaporation characteristics of complexes 1, 2, 5, and 6, and it revealed multistep weight losses with high residues. On the other hand, the thermogravimetric analysis curves of complexes 3, 4, 7, and 8 comprising tdao ligands revealed single-step weight losses with moderate residues. Single-crystal X-ray diffraction studies of complexes 1, 3, and 7 showed that all of the complexes have monomeric molecular structures. Complex 7 exhibited a low melting point (75 °C), good volatility, and high thermal stability compared with other complexes. Therefore, an atomic layer deposition process for the growth of ZrO2 was developed by using ZrCp(tdao)3 (7) as a novel precursor.

New Heteroleptic Germanium Precursors for GeO2 Thin Films by Atomic Layer Deposition.

This study describes the synthesis of 12 new germanium complexes containing ß-diketonate and/or N-alkoxy carboxamidate-type ligands as precursors for GeO2 through atomic layer deposition (ALD). A series of Ge(ß-diketonate)Cl complexes such as Ge(acac)Cl (1) and Ge(tmhd)Cl (2) were synthesized by using acetylacetone (acacH) and 2,2,6,6-tetramethyl-3,5-heptanedione (tmhdH). N-Alkoxy carboxamidate-type ligands such as N-methoxypropanamide (mpaH), N-methoxy-2,2-dimethylpropanamide (mdpaH), N-ethoxy-2-methylpropanamide (empaH), N-ethoxy-2,2-dimethylpropanamide (edpaH), and N-methoxybenzamide (mbaH) were used to afford further substituted complexes Ge(acac)(mpa) (3), Ge(acac)(mdpa) (4), Ge(acac)(empa) (5), Ge(acac)(edpa) (6), Ge(acac)(mba) (7), Ge(tmhd)(mpa) (8), Ge(tmhd)(mdpa) (9), Ge(tmhd)(empa) (10), Ge(tmhd)(edpa) (11), and Ge(tmhd)(mba) (12), respectively. Thermogravimetric analysis curves, which mostly exhibited single-step weight losses, were used to determine the evaporation properties of complexes 1-12. Interestingly, liquid complex 2 has no residue at 198 °C and therefore exhibits excellent vaporization properties and high volatility. Single-crystal X-ray diffraction studies of 1 and 7 demonstrated that the complexes had monomeric molecular structures with germanium chelated by the oxygen atoms of one or two bidentate ligands, respectively. An ALD process was developed for the growth of GeO2 using Ge(tmhd)Cl (2) as a new precursor and H2O2 as an oxidant. This study demonstrates the achievement of self-limiting growth of GeO2 films by varying the duration of injection/purge, with an observed ALD window at deposition temperatures ranging from 300 to 350 °C. The saturated growth per cycle of the GeO2 film was determined as 0.27 Å/cycle at a deposition temperature of 300 °C. The deposited films were observed to be amorphous consisting of GeO2.

Amidoxime-Containing Ti Precursors for Atomic Layer Deposition of TiN Thin Films with Suppressed Columnar Microstructure.

This paper reports the synthesis of three novel titanium complexes containing amidoxime ligands as potential precursors for titanium nitride (TiN) thin films fabricated using atomic layer deposition (ALD). A series of ligands, viz., N'-methoxy-N-methylacetimidamide (mnnoH), N'-ethoxy-N-methylacetimidamide (ennoH), and N'-methoxy-N-methylbenzimidamide (pnnoH), were successfully synthesized and used to produce Ti(mnno)(NMe2)3 (4), Ti(enno)(NMe2)3 (5), and Ti(pnno)(NMe2)3 (6). Thermogravimetric analysis curves of complexes 4-6 revealed a single-step weight loss up to 200 °C. Pyrolysis occurred beyond 200 °C. Among the three new complexes, 5 was liquid at room temperature. Therefore, TiN was synthesized by ALD using Ti(enno)(NMe2)3 (5) as a novel precursor. A TiN thin film was deposited from the Ti(enno)(NMe2)3 (5) precursor and NH3 plasma, and self-limiting growth was achieved by varying the injection/purge duration. TiN thin film growths were observed with a growth per cycle (GPC) of 0.05-0.13 nm·cy-1 at deposition temperatures between 150 and 300 °C, while the measured resistivity was as low as 420 µΩ·cm. The high reactivity of the precursor promotes nucleation, resulting in TiN thin films with smooth, good step coverage and preferentially orientated microstructure.

Hexagonal Carbon Nanoplates Decorated with Layer-Engineered MoS2: High-Performance Cathode Materials for Zinc-Ion Batteries.

Hexagonal carbon nanoplates bearing MoS2 (HCN@MoS2) were synthesized using two-dimensional (2D) microporous organic polymers as templating materials. The layer number of MoS2 in HCN@MoS2 and the 2D morphology of composites were critical factors to achieve high-performance cathode materials for aqueous zinc-ion batteries. The best cathode performance was obtained with HCN@MoS2 bearing 2-3 layered MoS2 (HCN@MoS2-2), showing excellent discharge capacities of 602 mAh/g (@50 mA/g), 498 mAh/g (@0.1 A/g), and 328 mAh/g (@1 A/g). The promising electrochemical performance of HCN@MoS2-2 is attributable to the facilitated insertion of zinc ions into 2-3 layered MoS2 due to the reduced lattice energy and the efficient electrochemical utilization of composite materials.

Supramolecular Phthalimide Networks Via Tandem Diels-Alder Reaction-Aromatization Using Biomass-Derived Furanic Dienes.

The design and synthesis of phthalimide derivatives are important goals for applications in fields such as pharmaceutical science and optoelectronics. In the present study, a facile and convenient synthetic pathway (no heat or acid/catalyst needed) is devised to produce phthalimides from a biomass-derived furan by directly introducing an N-carbamate group at the C-2 position of the furan ring via thermal Curtius rearrangement. The electron-donating N-carbamate group increases the energy level of the highest occupied molecular orbital of the furan diene, resulting in a significant increase of the rate of the Diels-Alder reaction with maleimide compared to the conventional furfuryl furan. Interestingly, the Diels-Alder adduct smoothly undergoes aromatization (dehydration) to generate the phthalimide motif. It is shown that the biomass-derived phthalimides can produce supramolecular gels and act as sensors of basic anions like F- and CN- . The novel synthetic pathway to phthalimide derivatives from a biomass-derived furan can potentially be used to develop novel phthalimide motifs for a variety of applications.

Surface activated zinc-glutarate for the copolymerization of CO2 and epoxides.

Zinc-glutarate (ZnGA) is a promising catalyst that can form polymers from CO2 and epoxides, thereby contributing to the development of CO2 utilization technologies and future sustainability. One of the obstacles to commercializing ZnGA in polymer industries is its low catalytic activity. In this study, we introduced activated two-dimensional (2D) ZnGA to improve its catalytic activity in polymerization. The morphology-controlled 2D ZnGA was treated with H3Co(CN)6, and a porous granular-type Co-modified ZnGA (Co-ZnGA) was prepared. The morphology of 2D ZnGA is a prerequisite for the activation by H3Co(CN)6. The catalytic properties of Co-ZnGA were evaluated by copolymerization of various epoxides and CO2, and exhibited catalytic activity of 855, 1540, 1190, and 148 g g-cat-1 with propylene oxide, 1,2-epoxyhexane, 1,2-epoxybutane, and styrene oxide, respectively. This study provided a new strategy using 2D ZnGA instead of conventional ZnGA for increasing the catalytic activity in CO2 polymerization.

Core-Shell ZnO@Microporous Organic Polymer Nanospheres as Enhanced Piezo-Triboelectric Energy Harvesting Materials.

Core-shell nanospheres were prepared by the homogeneous coating of piezoelectric ZnO nanorod aggregates with triboelectric microporous organic polymer (MOP). The small energy harvesting performance of ZnO@MOP was significantly enhanced, compared with those of ZnO and MOP, due to the piezoelectrification-induced polarization of inner ZnO and the enhanced generation of tribopositive charges of MOP. Piezo-triboelectric nanogenerators (PTENGs) fabricated with ZnO@MOP showed peak-to-peak voltages of up to 534 V and a maximum power density of 1.19 mW cm-2 . In addition, the PTENGs showed excellent durability for 30 000 cycles, demonstrating as efficient power sources for charging electrolytic capacitors and for operating 200 green light emitting diode bulbs.

Hydroboration of Hollow Microporous Organic Polymers: A Promising Postsynthetic Modification Method for Functional Materials.

This work shows that hydroboration can be efficiently applied to the postsynthetic modification (PSM) of the Sonogashira-Hagihara coupling-based microporous organic polymers (MOPs). Hollow MOPs (H-MOPs) were prepared by template synthesis through the Sonogashira-Hagihara coupling of tetra(4-ethynylphenyl)methane with 1,4-diiodobenzene. The H-MOPs were used as platforms in the PSM-based functionalization. The heat-treatment of H-MOPs in the presence of a neat pinacolborane reagent resulted in the successful addition of pinacolborane groups to the internal alkynes of H-MOPs, generating H-MOPs with pinacolboranes (H-MOP-BPs). The pinacolborane moieties in the H-MOP-BP were further converted to boronic acid groups. The resultant H-MOP-BAs were used as heterogeneous organocatalysts in the CO2 fixation with epoxides to cyclic carbonates at ambient temperature (50 °C). Moreover, H-MOP-BAs could be recycled with retention of the catalytic performance in five successive reactions.

Uniform wrapping of copper(I) oxide nanocubes by self-controlled copper-catalyzed azide-alkyne cycloaddition toward selective carbon dioxide electrocatalysis.

Copper(I) oxide nanocubes were wrapped with an extremely uniform organic layer grown by self-controlled, Cu-mediated catalysis. This layer aided in retaining the initial cubic structure of the copper nanocubes during their use as a CO2 reduction electrocatalyst, resulting in high CO2 reduction selectivity by strong suppression of hydrogen evolution because of exclusion of water from the surface.

Novel Heteroleptic Tin(II) Complexes Capable of Forming SnO and SnO2 Thin Films Depending on Conditions Using Chemical Solution Deposition.

A new heteroleptic complex series of tin was synthesized by the salt metathesis reaction of SnX2 (X = Cl, Br, and I) with aminoalkoxide and various N-alkoxy-functionalized carboxamide ligands. The complexes, [ClSn(dmamp)]2 (1), [BrSn(dmamp)]2 (2), and [ISn(dmamp)]2 (3), were prepared from the salt metathesis reaction of SnX2 with one equivalent of dmamp; [Sn(dmamp)(empa)]2 (4), [Sn(dmamp)(mdpa)]2 (5), and [Sn(dmamp)(edpa)]2 (6) were prepared via the salt metathesis reaction using complex 2 with one equivalent of N-alkoxy-functionalized carboxamide ligand. Complexes 1-5 displayed dimeric molecular structures with tin metal centers interconnected by µ2-O bonding via the alkoxy oxygen atom. The molecular structures of complexes 1-5 showed distorted trigonal bipyramidal geometries with lone pair electrons in the equatorial position. Using complex 6 as a tin precursor, SnO x films were deposited by chemical solution deposition (CSD) and subsequent post-deposition annealing (PDA) at high temperatures. SnO and SnO2 films were selectively obtained under controlled PDA atmospheres of argon and oxygen, respectively. The SnO films featured a tetragonal romarchite structure with high crystallinity and a preferred growth orientation along the (101) plane. They also exhibited a lower transmittance of >52% at 400 nm due to an optical band gap of 2.9 eV. In contrast, the SnO2 films exhibited a tetragonal cassiterite crystal structure and an extremely high transmittance of >97% at 400 nm was observed with an optical band gap of 3.6 eV.

Group IV Transition Metal (M = Zr, Hf) Precursors for High-κ Metal Oxide Thin Films.

This paper describes the synthesis of eight novel zirconium and hafnium complexes containing N-alkoxy carboxamidate-type ligands, as potential precursors for metal oxides and atomic layer deposition (ALD) for HfO2. A series of ligands, viz., N-ethoxy-2,2-dimethylpropanamide (edpaH), N-ethoxy-2-methylpropanamide (empaH), and N-methoxy-2,2-dimethylpropanamide (mdpaH), were used to afford complexes Zr(edpa)4 (1), Hf(edpa)4 (2), Zr(empa)4 (3), Hf(empa)4 (4), Zr(mdpa)4 (5), Hf(mdpa)4 (6), ZrCp(edpa)3 (7), and HfCp(edpa)3 (8). Thermogravimetric analysis curves assessed for the evaporation characteristics of complexes 1-8 revealed single-step weight losses with low residues, except for the mdpa-containing complexes. Single-crystal X-ray diffraction studies of 1, 2, 5, and 6 revealed that all the complexes have monomeric molecular structures, with the central metal ion surrounded by eight oxygen atoms from the four bidentate alkoxyalkoxide ligands. Among the complexes prepared, 8 exhibited a low melting point (64 °C), good volatility (1 Torr at 112 °C), high thermal stability, and excellent endurance over 6 weeks at 120 °C. Therefore, an ALD process for the growth of HfO2 was developed using HfCp(edpa)3 (8) as a novel precursor. Furthermore, the HfO2 film exhibited a low capacitance equivalent oxide thickness of ∼1.5 nm, with Jg as low as ∼3 × 10-4 A/cm2 at Vg -1 V in a metal-insulator-semiconductor capacitor (Au/HfO2/p-Si).

Defect-rich CeO2 in a hollow carbon matrix engineered from a microporous organic platform: a hydroxide-assisted high performance pseudocapacitive material.

A microporous organic polymer (MOP) was utilized for the engineering of nanoparticulate CeO2 in a hollow carbon matrix (H-C/CeO2). After CeO2 nanoparticles were incorporated into a hollow MOP platform (H-MOP) through the decomposition of cerium acetate, successive carbonization produced H-C/CeO2. The redox feature of defective CeO2 in a conductive carbon matrix induced promising pseudocapacitive behavior. In particular, the H-C/CeO2 showed excellent electrochemical performance in an alkaline electrolyte (KOH), due to the hydroxide ion-assisted redox behavior of defective CeO2. H-C/CeO2-3 with an optimized amount of CeO2 showed specific capacitances of up to 527 (@0.5 A g-1) and 493 F g-1 (@1 A g-1). Even at high current densities of 10 and 20 A g-1, the H-C/CeO2-3 maintained high capacitances of 458 and 440 F g-1, respectively. After 10 000 cycling tests, the H-C/CeO2-3 retained the 94-95% capacitance of the first cycle.

Room-Temperature Synthesis of a Hollow Microporous Organic Polymer Bearing Activated Alkyne IR Probes for Nonradical Thiol-yne Click-Based Post-Functionalization.

This work shows that hollow microporous organic polymer (H-MOP-A) with activated internal alkynes as IR probes can be prepared by template synthesis based on acyl Sonogashira-Hagihara coupling at room temperature. The H-MOP-A is a versatile platform in the main chain PSM based on nonradical thiol-yne click reaction. Moreover, an IR peak of internal alkynes in the H-MOP-A is very intense and could be utilized in the monitoring of thiol-yne click-based main chain PSM. The functionalized H-MOP-A with carboxylic acids (H-MOP-CA) showed efficient adsorption toward Ag+ ions. The resultant H-MOP-CA-Ag showed excellent performance in the CO2 fixation to α-alkylidene cyclic compounds.

Valorization of Click-Based Microporous Organic Polymer: Generation of Mesoionic Carbene-Rh Species for the Stereoselective Synthesis of Poly(arylacetylene)s.

This work reports the functionalization of azide-alkyne click-based microporous organic polymer (CMOP). The generation of triazolium salts and successive deprotonation induced mesoionic carbene species in hollow CMOP (H-CMOP). Rh(I) species could be coordinated to the mesoionic carbene species to form H-CMOP-Rh, showing excellent heterogeneous catalytic performance in the stereoselective polymerization of arylacetylenes.

Fe3O4@Void@Microporous Organic Polymer-Based Multifunctional Drug Delivery Systems: Targeting, Imaging, and Magneto-Thermal Behaviors.

Multifunctional drug delivery systems were designed and engineered by template synthesis of a microporous organic polymer (MOP) and by postsynthetic modification. Hollow MOP spheres bearing Fe3O4 yolks (Fe3O4@Void@MOP) were prepared by the synthesis of MOP on Fe3O4@SiO2 nanoparticles and by successive silica etching. In addition to the magneto-thermal function of Fe3O4 yolks, an aggregation-induced emission (AIE) feature was incorporated into the Fe3O4@Void@MOP through a homocoupling of tetra(4-ethynylphenyl)ethylene to form Fe3O4@Void@MOP-TE. Folate groups were further introduced into Fe3O4@Void@MOP-TE through the postsynthetic modification based on the thiol-yne click reaction. The resultant Fe3O4@Void@MOP-TE-FA showed multifunctionality in antitumoral therapy via folate receptor targeting, doxorubicin delivery, AIE-based imaging, and the magneto-thermal feature.

Fabrication of Poly(ethylene terephthalate) Fiber@Microporous Organic Polymer with Amino Groups@Cu Films for Flexible and Metal-Economical Electromagnetic Interference Shielding Materials.

Flexible and metal-economical electromagnetic interference (EMI) shielding films were fabricated based on microporous organic polymer (MOP) chemistry. MOP with amino groups (MOP-A) could be introduced to the surface of poly(ethylene terephthalate) (PET) fibers. Due to the microporosity and amino groups of MOP-A, Ag+ could be easily incorporated into PET@MOP-A. Through Ag-catalyzed electroless Cu deposition, PET@MOP-A@Cu films were fabricated. The morphological and chemical structures of the PET@MOP-A@Cu were characterized by scanning electron microscopy, X-ray diffraction studies, and X-ray photoelectron spectroscopy. Among the films, the PET@MOP-A@Cu-40 with 41 wt % Cu (a thickness of 0.64 µm) showed excellent EMI shielding performance with 64.3-73.8 dB against an EM of 8-12 GHz. Moreover, it showed retention of the original EMI shielding performance against 1000 bending (R = 5 mm) tests.

Nanoparticulate Conjugated Microporous Polymer with Post-Modified Benzils for Enhanced Pseudocapacitor Performance.

Conjugated microporous polymer (CMP)-based energy-storage materials were developed for pseudocapacitors. Nanoparticulate CMP (N-CMP) with an average diameter of 41±4 nm was prepared through kinetic growth control in the Sonogashira coupling of 1,3,5-triethynylbenzene with 1,4-diiodobenzene. The N-CMP is rich in a diphenylacetylene moiety in its chemical structure. Through the FeCl3 -catalyzed oxidation of diphenylacetylene moieties, N-CMP with benzil moieties (N-CMP-BZ) was prepared and showed enhanced electrochemical performance as an electrode material of pseudocapacitors, compared with CMP, CMP-BZ, and N-CMP. In model studies, the benzil was redox active and showed two-electron reduction behavior. The excellent electrochemical performance of N-CMP-BZ is attributable to the enhanced utilization of functional sites by a nanosize effect and the additional redox contribution of benzil moieties.

Synthesis and characterization of novel zinc precursors for ZnO thin film deposition by atomic layer deposition.

A novel series of zinc complexes, [EtZn(dab)]2 (1), [EtZn(damb)]2 (2), [EtZn(damp)]2 (3), and [EtZn(dadb)]2 (4), were prepared via single-step substitution. Further, these were analyzed by nuclear magnetic resonance (NMR), Fourier transform infrared spectroscopy (FT-IR), elemental analysis, single crystal X-ray diffraction analysis, and thermogravimetric analysis (TGA). The X-ray crystallography analysis revealed that all complexes exist as dimeric structures with distorted tetrahedral geometry having zinc centers that are interconnected via µ2-O bonding of the aminoalkoxy oxygen atom. TGA and thermal analysis of the complexes showed high volatilities and stabilities at sublimation temperatures of 70, 95, 90, and 105 °C at 0.5 Torr for the respective compounds. Precursor 3 was successfully used for ZnO thin film deposition by ALD. A growth rate per cycle (GPC) of 0.125 nm per cycle was obtained at 200 °C and XPS analysis confirmed the growth of highly pure ZnO films without carbon and nitrogen impurities, while XRD analysis revealed the deposition of reasonably crystalline films. Additionally, the high transmittance and wide bandgap of the films are suitable for optoelectronic applications.